Master Cylinder Reservoir Removal And Installation: Removal

Disconnect reservoir lead wire at coupler (1).
Clean outside of reservoir (2) and master cylinder (3).

Fig 1: Identifying Coupler, Reservoir & Master Cylinder
Courtesy of SUZUKI OF AMERICA CORP.
Take out fluid with syringe or such.
Disconnect clutch reservoir hose (1) from reservoir (2) for M/T vehicle.

Fig 2: Identifying Clutch Reservoir Hose & Reservoir
Courtesy of SUZUKI OF AMERICA CORP.
Remove reservoir connector pin (1) by using special tool and then reservoir.
Special Tool
1. 09916-44310
Fig 3: Removing Reservoir Connector Pin Using Special Tool
Courtesy of SUZUKI OF AMERICA CORP.