Master Cylinder Assembly Removal And Installation: Removal

Disconnect reservoir lead wire at coupler (1).

Fig 1: Identifying Reservoir Lead Wire At Coupler
Courtesy of SUZUKI OF AMERICA CORP.
Clean outside of master cylinder and take out fluid with syringe or such.
Disconnect clutch reservoir hose (1) from reservoir (2) for M/T vehicle.

Fig 2: Identifying Clutch Reservoir Hose & Reservoir
Courtesy of SUZUKI OF AMERICA CORP.
Loosen brake pipe flare nuts (2) for master cylinder (1).
Disconnect brake pipes (3) from master cylinder (1).

Fig 3: Identifying Brake Pipes & Master Cylinder
Courtesy of SUZUKI OF AMERICA CORP.
Loosen master cylinder fixing nuts (1) and then remove master cylinder (2) with reservoir (3) from brake booster (4).

Fig 4: Identifying Master Cylinder, Reservoir & Brake Booster
Courtesy of SUZUKI OF AMERICA CORP.