How To Read System Circuit Diagram

The circuit diagram is designed so the current flows from the top of the diagram (power source) to the bottom of the diagram (ground) as if giving an image of water flow.

1. Fuse No  .
2. Circuit jumping page / direction 
   NOTE: This means "Jump to the page directed with the arrow(s) by their number.
   (For example:" Two arrows directing left" means" Jump to two pages before".)
   You will find the same symbol with the arrows directing opposite in the referenced page. The circuit continues between the symbols.
3. Circuit jumping point / direction 
   NOTE: The circuit continues to the same symbol with opposite direction within the page.
   You will find the other symbol in the direction of the arrow.
4. Terminals-in-one-connector mark 
5. Wire color 
6. Shield wire 
7. Ground point 
8. "From" or "To" (With ID letter "s") 
9. Specification variation 

   The white arrow between A and B means "or".

10. "From" (With ID letter "s") 
11. "To" (With ID letter "s") 
12. Connector code 
13. Terminal No  .
14. Symbol mark 
15. "SEE" mark 
    Fig 1: System Circuit Diagram

    Courtesy of SUZUKI OF AMERICA CORP.