Water Pump And Generator Drive Belt Removal And Installation: Installation

Reverse removal procedure noting the following instruction.

• Adjust belt tension referring to WATER PUMP AND GENERATOR DRIVE BELT INSPECTION AND ADJUSTMENT .
• Tighten all fasteners to specified torque.

  Tightening torque 

  Tension pulley bolt a: 25 N.m (2.5 kg-m, 18.0 lb-ft) 

  Tension pulley adjusting bolt b: 25 N.m (2.5 kg-m, 18.0 lb-ft) 

  Fig 1: Identifying Generator Drive Belt & Tension Pulley Adjusting Bolt

  Courtesy of SUZUKI OF AMERICA CORP.