DTC Confirmation Procedure
NOTE:
Check to make sure that the following conditions are satisfied when using this "DTC CONFIRMATION PROCEDURE ".
- Intake air temperature: between -10 °C and 45 °C (14 °F and 113 °F)
- Engine coolant temperature: between -10 °C and 110 °C (14 °F and 230 °F)
- The following DTCs are not detected: CMP sensor, TP sensor and IAC system
- With ignition switch OFF, connect scan tool.
- Turn ON ignition switch and clear DTC by using scan tool if any.
- Start engine.
- Check DTC and pending DTC by using scan tool.