DTC Troubleshooting
DTC TROUBLESHOOTING CHART
| Step | Action | YES | NO |
|---|---|---|---|
| 1 | Was "Engine and Emission Control System Check" performed? | Go to Step 2. | Go to ENGINE AND EMISSION CONTROL SYSTEM CHECK . |
| 2 | Fuel filler cap check
Is the result satisfactory? |
Go to Step 3. | Replace the fuel filler cap with new genuine one. |
| 3 | Pressurization test
Is any leak detected? |
Go to Step 4. | Go to Step 7. |
| 4 | Smoke test
Is there any leak part? |
Repair the leak and then go to Step 3 again. | Go to Step 5. |
| 5 |
Is check result satisfactory? |
Go to Step 6. | Replace EVAP canister purge valve. |
| 6 | EVAP canister vent valve and EVAP leak check pressure sensor check
Is check result satisfactory? |
Return to Step 3. | Replace EVAP leak check module. |
| 7 | EVAP canister vent valve and EVAP leak check pressure sensor check
Is check result satisfactory? |
Go to Step 8. | Replace EVAP leak check module. |
| 8 | Fuel level sensor and its circuit check
Are they in good condition? |
Go to Step 9. | Repair or replace malfunction part. |
| 9 | EVAP leak check
Is DTC P0456 detected? |
Substitute a known-good ECM and recheck. | End. |