Fuel Pipe Removal And Installation: Removal
- Relieve fuel pressure in fuel feed line according to FUEL PRESSURE RELIEF PROCEDURE
- Disconnect negative (-) cable at battery.
- Disconnect fuel pipe joint and fuel hose (3) from fuel pipe (2) at the front and rear of each fuel pipe referring to FUEL HOSE DISCONNECTING AND RECONNECTING
- Mark the location of clamps (1) on fuel pipes (2) so that the clamps can be reinstalled to where they were.
- Remove pipes (2) with clamp from vehicle.
- Remove clamp (1) from pipes (2).
Courtesy of SUZUKI OF AMERICA CORP.