Rear Wheel Hub Assembly Removal And Installation: Removal

Hoist vehicle and remove rear wheels.
Uncaulk rear axle nut (1).
Pull up parking brake lever fully and remove rear axle nut (1).

Fig 1: Pulling Up Parking Brake Lever
Courtesy of SUZUKI OF AMERICA CORP.
Remove rear break shoe referring to REAR BRAKE SHOE REMOVAL AND INSTALLATION .
Disconnect brake pipe (1) from wheel cylinder (2) and put wheel cylinder bleeder plug cap (3) onto pipe to prevent fluid from spilling.

Fig 2: Identifying Brake Pipe, Wheel Cylinder & Wheel Cylinder Bleeder Plug Cap
Courtesy of SUZUKI OF AMERICA CORP.
Loosen parking cable cap nut (1).

Fig 3: Identifying Parking Cable Cap Nut
Courtesy of SUZUKI OF AMERICA CORP.
Removal rear wheel hub housing bolts (1) and then remove rear wheel hub assembly and back plate.

Fig 4: Identifying Rear Wheel Hub Housing Bolts
Courtesy of SUZUKI OF AMERICA CORP.
Refer to Step 7) of FRONT WHEEL HUB ASSEMBLY REMOVAL AND INSTALLATION to remove hub bolts since the rear wheel hub assembly is the same as the front wheel hub assembly.