Enable conditions
WARNING: This page is about a different variant/trim than selected.
ENABLE CONDITIONS
| Parameter | Minimum | Maximum |
|---|---|---|
| P0751 | ||
| Battery voltage | 10.5 V | - |
| Engine coolant temp. | 40°C (104°F) | - |
| Vehicle speed | 1.24 mph | - |
| Accel pedal opening | 4% | - |
| Engine speed | 400 RPM | - |
| 4WD low switch | 1st + 2nd | |
| T/F range | Off | |
| Shift position | D | |
| Output speed sensor | Normal | |
| Input speed sensor | Normal | |
| Shift solenoid No. 1, No. 2, No. 3 | Normal | |
| Pressure control solenoid No. 2, No. 3 | Normal | |
| CAN communication | Normal | |
| AT oil temp. | 10°C (50°F) | |
| P0752 | ||
| Battery voltage | 10.5 V | |
| Engine coolant temp. | 40°C (104°F) | |
| Vehicle speed | 1.24 mph | |
| Accel pedal opening | 4% | |
| Engine speed | 400 RPM | |
| Gear position | 3rd + 4th, 3rd + 5th, 4th + 5th | |
| 4WD low switch | Off | |
| Shift position | D | |
| Output speed sensor | Normal | |
| Input speed sensor | Normal | |
| Shift solenoid No. 1, No. 2, No. 3 | Normal | |
| Pressure control solenoid No. 2, No. 3 | Normal | |
| CAN communication | Normal | |
| AT oil temp. | 10 °C (50°F) | - |