Output Shaft Speed Sensor Inspection

WARNING: This page is about a different car, the 2008 Suzuki Grand Vitara and 2007 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect negative cable at battery.
Hoist vehicle.
Disconnect output shaft speed sensor connector.
Check output shaft speed sensor (1) for resistance between terminals of sensor.
Output shaft speed sensor resistance

Standard: 560 - 680 Ω (at 20°C (68°F))

Fig 1: Measuring Resistance Between Output Shaft Speed Sensor Terminals
Courtesy of SUZUKI OF AMERICA CORP.