Rear Wiper Removal And Installation (If Equipped): Installation

Install rear wiper motor (1) and tighten rear wiper motor mounting bolts to specified torque.
Tightening torque

Rear wiper motor mounting bolt a: 7 N.m (0.7 kg-m, 5.0 lb-ft)

Fig 1: Identifying Rear Wiper Motor Mounting Bolt
Courtesy of SUZUKI OF AMERICA CORP.
Connect coupler to rear wiper motor.
Install rear end door trim referring to REAR END DOOR LOCK ASSEMBLY REMOVAL AND INSTALLATION .
Install rear wiper arm with blade assembly (1) to specified position as shown in figure.

Fig 2: Identifying Rear Wiper Arm With Blade Assembly
Courtesy of SUZUKI OF AMERICA CORP.
Tighten rear wiper arm nut to specified torque, and then install arm cover (1).
Tightening torque

Rear wiper arm nut a: 8 N.m (0.8 kg-m, 6.0 lb-ft)

Fig 3: Identifying Rear Wiper Arm Cover
Courtesy of SUZUKI OF AMERICA CORP.
Connect negative (-) cable to battery.