LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2006 >> Grand Vitara Base, AWD, Standard >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Lubrication System >> Engine Lubrication System >> Repair Information >> Oil Pan And Oil Pump Strainer Removal And Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Oil Pan And Oil Pump Strainer Removal And Installation: Removal

  1. Remove oil level gauge guide.
  2. Raise vehicle.
  3. Remove engine undercover (1).
  4. Drain engine oil by removing drain plug (2).
    Fig 1: Identifying Engine Undercover & Drain Plug
    G04807537Courtesy of SUZUKI OF AMERICA CORP.
  5. Remove front suspension frame referring to FRONT SUSPENSION FRAME, STABILIZER BAR AND/OR BUSHINGS REMOVAL AND INSTALLATION .
  6. Remove lower oil pan (2) from upper oil pan (1).
    Fig 2: Identifying Lower Oil Pan & Upper Oil Pan
    G04807538Courtesy of SUZUKI OF AMERICA CORP.
  7. Remove drive plate cover (A/T) or clutch housing lower plate (M/T) from transmission.
  8. Remove oil pump strainer bracket.
  9. Remove upper oil pan from lower crankcase.
  10. Remove oil pump strainer (1) and O-rings (2) from oil pump.
    Fig 3: Identifying Oil Pump Strainer & O-Rings
    G04807539Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals