DTC Clearance

NOTE: DTC and freeze frame data stored in TCM memory are also cleared in following cases. Be careful not to clear them before keeping their record.

When power to TCM is cut off (by disconnecting battery cable, removing fuse or disconnecting TCM connector).
When the same malfunction (DTC) is not detected again during 40 engine warm-up cycles.

Turn ignition switch OFF.
Connect SUZUKI scan tool to data link connector (DLC) (1).
Special Tool
1. SUZUKI scan tool
  
  Fig 1: Connecting SUZUKI Scan Tool To Data Link Connector (DLC)
  Courtesy of SUZUKI OF AMERICA CORP.
Clear DTC according to instructions displayed on SUZUKI scan tool. Refer to SUZUKI scan tool operator's manual for further details.
Clear DTC according to instructions displayed on SUZUKI scan tool. Refer to SUZUKI scan tool operator's manual for further details.