LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2006 >> Grand Vitara Base, AWD, Automatic >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Electrical Devices >> Repair Instructions >> Knock Sensor Removal And Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Knock Sensor Removal And Installation: Removal

  1. Disconnect negative cable at battery.
  2. Remove intake manifold from cylinder head referring to INTAKE COLLECTOR AND INTAKE MANIFOLD REMOVAL AND INSTALLATION .
  3. Disconnect knock sensor connector (1).
  4. Remove knock sensor (2) from cylinder block.
    Fig 1: Locating Knock Sensor On Cylinder Block
    G04807282Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals