Intake Collector And Intake Manifold Removal And Installation: Installation

Reverse removal procedure for installation noting the following.

• Use new intake manifold gaskets (1).
  Fig 1: Identifying Intake Manifold Gaskets

  Courtesy of SUZUKI OF AMERICA CORP.
• Use new intake collector gaskets, EGR valve gasket and EGR pipe gasket.
• Install electric throttle body assembly referring to ELECTRIC THROTTLE BODY ASSEMBLY REMOVAL AND INSTALLATION .
• Check to ensure that all removed parts are back in place.

  Reinstall any necessary parts which have not been reinstalled.

• Refill cooling system referring to COOLING SYSTEM FLUSH AND REFILL .
• Connect negative cable (-) at battery.
• Upon completion of installation, verify that there is no fuel leakage at each connection according to FUEL LEAKAGE CHECK PROCEDURE .