Without Advanced Air Bag

Scan Tool Data

Data List Of SDM:

Scan Tool Data Definition
Back Up Volt (V) This parameter indicates the capacity of the backup condenser installed to maintain the ignition current (as much as possible) even when the power supply to SDM that ignites the inflator is shut off

Battery Volt (V) Battery voltage is an analog input signal read by SDM.

System ID (4ch/8ch) This parameter indicates the number of initiator circuits.

Driv A/B Ini Res (Driver air bag initiator resistance) (ohm) This parameter indicates the resistance of the driver air bag initiator circuit.

Pass A/B Ini Res (Passenger air bag initiator resistance) (ohm) This parameter indicates the resistance of the passenger air bag initiator circuit.

Driv Pret Ini Res (Driver pretensioner initiator resistance) (ohm) This parameter indicates the resistance of the driver seat belt pretensioner initiator circuit.

Pass Pret Ini Res (Passenger pretensioner initiator resistance) (ohm) This parameter indicates the resistance of the passenger seat belt pretensioner initiator circuit.

LH Side Ini Res (Left side-air bag initiator resistance) (ohm) This parameter indicates the resistance of the left side-air bag initiator circuit.

RH Side Ini Res (Right side-air bag initiator resistance) (ohm) This parameter indicates the resistance of the right side-air bag initiator circuit.

LH Curtain Ini Res (Left side curtain air bag initiator resistance) (ohm)This parameter indicates the resistance of the left side curtain-air bag initiator circuit.

RH Curtain Ini Res (Right side curtain-air bag initiator resistance) (ohm)This parameter indicates the resistance of the right side curtain-air bag initiator circuit.