LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2006 >> Forenza Premium, 4D Wagon, Automatic >> Repair and Diagnosis (Single Page) >> Engine Performance >> Fuel Delivery >> Fuel System >> Repair Instructions >> Fuel Pump Removal and Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Pump Removal and Installation: Installation

  1. Clean the gasket mating surface on the fuel tank.
  2. Position the new gasket in place.
  3. Install the fuel pump into the fuel tank in the same location as removed for ease of line and connector installation.
  4. Install the fuel pump assembly clip.
  5. Connect the fuel pump assembly connector.
  6. Install the fuel pump line.
    Fig 1: Identifying Electrical Connector At Fuel Pump Assembly
    G04716647Courtesy of SUZUKI OF AMERICA CORP.
  7. Install the fuel pump access cover.
  8. Connect the negative battery cable.
  9. Perform an operational check of the fuel pump.
  10. Install the rear seat. Refer to REAR SEAT CUSHION REMOVAL AND INSTALLATION .
    Fig 2: Identifying Fuel Pump Access Cover
    G04716646Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals