Rear Window Wiper Motor Removal and Installation (For HATCHBACK Model)

Rear Window Wiper Motor Removal and Installation (For HATCHBACK Model)

Removal
1. Disconnect the negative battery cable.
2. Remove the rear window wiper arm.
3. Remove the hatchback door lower garnish molding.
4. Remove the bolts and the rear wiper motor.




5. Disconnect the electrical connector.

Installation
1. Connect the electrical connector.
2. Install the rear wiper motor with the bolts.

Tighten: Tighten the rear wiper motor bolts to 9 Nm (80 in. lbs.).

3. Install the hatchback door lower garnish molding.
4. Install the rear window wiper arm.




5. Connect the negative battery cable.