Fuel Sender Removal and Installation: Removal

Disconnect the insulator connector.

Fig 1: Disconnecting Insulator Connector
Courtesy of SUZUKI OF AMERICA CORP.
Push the terminal wedge (1) in the insulator connector.

Fig 2: Pushing Terminal Wedge In Insulator Connector
Courtesy of SUZUKI OF AMERICA CORP.
Push the wedge (1) outside and then pull the wires to disconnect from insulator.

Fig 3: Disconnecting Insulator
Courtesy of SUZUKI OF AMERICA CORP.
Remove the fuel-level sensor (1) from the sender-housing (2).
Remove the sender-housing (2).

Fig 4: Removing Sender-Housing
Courtesy of SUZUKI OF AMERICA CORP.
Remove fuel sender assembly (3).

Fig 5: Removing Fuel Sender Assembly
Courtesy of SUZUKI OF AMERICA CORP.