Watertest Stand Specifications
WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.
WATERTEST STAND SPECIFICATIONS
| Application | Description |
|---|---|
| Nozzle Type | Full jet spray nozzle #1/2 GG-25 or equivalent with a 60° included angle |
| Nozzle Height | Approximately 1,600 mm (63.0 in.) from the floor |
| Volume of Flow | 14 L (3.7 gal) per minute |
| Pressure | 155 kPa (22.5 psi) measured at the nozzle |
| Windshield and A-pillar Test Stand Position | Approximately 30° down, 45° toward the rear, and aimed at the corner of the windshield |
| B-pillar Test Stand Position | Approximately 30° down, 45° toward the rear, and aimed at the center of the rear door |
| Back Window and Rear Deck Lid Test Stand Position | Approximately 30° down, 30° toward the front and aimed approximately 610 mm (24.0 in.) from the corner of the back window |