LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2006 >> Forenza Base, 4D Sedan, Automatic >> Repair and Diagnosis (Single Page) >> Engine Performance >> Tune-Up >> Ignition System >> Repair Instructions >> Electronic Ignition System Ignition Coil Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Electronic Ignition System Ignition Coil Removal and Installation: Removal

  1. Disconnect the negative battery cable.
  2. Disconnect the Electronic Ignition (EI) system ignition coil connector.
  3. Note the ignition wire location and remove the ignition wires.
  4. Remove the EI system ignition coil retaining bolts.
  5. Remove the EI system ignition coil.
    Fig 1: Identifying EI System Ignition Coil Retaining Bolts
    G04817227Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals