LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2006 >> Forenza Base, 4D Sedan, Automatic >> Repair and Diagnosis (Single Page) >> Engine Performance >> Testing & Diagnosis >> Engine Electrical Devices >> Engine Electrical Devices >> Throttle Body Removal and Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Throttle Body Removal and Installation: Installation

CAUTION: Use care in cleaning old gasket material from machined aluminum surfaces. Sharp tools may damage sealing surfaces.
  1. Clean the gasket mating surface on the intake manifold.
  2. Clean the throttle body.
  3. Install the throttle body assembly with a new gasket to the intake manifold.
  4. Install the throttle body retaining nuts.

    Tighten: 

    Tighten the throttle body retaining nuts to 10 N.m (89 lb-in).

  5. Connect the ETC connector.
  6. Connect the coolant hoses to the throttle body.
  7. Connect the vacuum hoses to the throttle body.
  8. Install the air intake tube.
  9. Connect the breather hose to the valve cover.
  10. Connect the IAT sensor connector.
  11. Connect the negative battery cable.
  12. Fill the cooling system.
scientia non olet · About LEMON Manuals