LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2006 >> Forenza Base, 4D Sedan, Automatic >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Repair Instructions >> Radiator Removal and Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Radiator Removal and Installation: Installation

  1. Set the radiator into place in the vehicle with the radiator bottom posts in the rubber shock bumpers.
    Fig 1: Identifying Feed Hose From Bottom Of Surge Tank
    G04716630Courtesy of SUZUKI OF AMERICA CORP.
  2. Connect the transaxle cooler pipes to the lower radiator tank, if equipped.
  3. Install the transaxle pipe and support clamp to the radiator with a bolt.
  4. Connect the surge tank hose to the radiator.
  5. Secure the surge tank hose with a hose clamp.
  6. Connect the upper radiator hose and the lower radiator hose to the radiator.
  7. Secure each hose with a hose clamp.
  8. Position the radiator retainers in place.
  9. Install the upper radiator retainer bracket.
  10. Install the upper radiator retaining bolt.
  11. Install the main and the auxiliary cooling fans. Refer to Electric Cooling Fan - Main or Auxiliary Removal and Installation .
  12. Refill the engine cooling system. Refer to Draining and Refilling the Cooling System .
  13. Connect the negative battery cable.

    Tighten: 

    Tighten the radiator retaining bolt to 8 N.m (71 lb-in).

    Fig 2: Identifying Upper Radiator Hose From Radiator
    G04716629Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals