"CRUISE" Indicator Lamp Circuit Check

CRUISE STEP ACTION REFERENCE

Step	Action	YES	NO
1	Check circuit for short Disconnect connector from cruise control module with ignition switch OFF. Turn ignition switch ON. Does cruise main switch indicator lamp turn ON?	"LT GRN/WHT" circuit is shorted to ground.	Go to Step 2.
2	Check circuit for open Check for proper connection to cruise control module at terminal "E52-10". If OK, connect terminal "E52-10" to ground. Does indicator lamp turn ON at ignition switch ON?	Lamp circuit is OK.	Check "LT GRN/WHT" or "BLK/RED" for open. If circuit is OK, replace combination meter.