LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2006 >> Aerio Premium, FWD, Standard >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Lubrication System >> Engine Lubrication System >> Repair Instructions >> Oil Pump Removal and Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Oil Pump Removal and Installation: Installation

  1. Install oil pump (2) and baffle plate to lower crank case (1) and tighten bolts to specified torque.
    NOTE: When installing oil pump, be careful not to allow pins to fall off.

    Tightening torque 

    Oil pump mounting bolt (M8 bolt) a: 25 N.m (2.5 kg-m, 18.0 lb-ft) 

    Baffle plate bolt (M6 bolt): 11 N.m (1.1 kg-m, 8.0 lb-ft) 

    Fig 1: Installing Oil Pump And Baffle Plate To Lower Crank Case
    G04589932Courtesy of SUZUKI OF AMERICA CORP.
  2. Install oil pump sprocket cover (1) and tighten bolts to specified torque.

    Tightening torque 

    Oil pump sprocket cover bolt a: 11 N.m (1.1 kg-m, 8.0 lb-ft) 

    Fig 2: Tightening Oil Pump Sprocket Cover Bolt
    G04589933Courtesy of SUZUKI OF AMERICA CORP.
  3. Install oil pan and oil pump strainer.

    Refer to OIL PAN AND OIL PUMP STRAINER REMOVAL AND INSTALLATION 

  4. Refill engine with engine oil referring to ENGINE OIL AND FILTER CHANGE .
  5. Connect negative cable at battery.
  6. After completing installation, check oil pressure by running engine. Refer to OIL PRESSURE CHECK .
scientia non olet · About LEMON Manuals