Tightening Torque Specifications
TIGHTENING TORQUE SPECIFICATIONS CHART
| Fastening part | Tightening torque | ||
|---|---|---|---|
| N.m | kgf-m | lb-ft | |
| Transaxle oil filler / level and drain plug (for M/T vehicle) | 21 | 2.1 | 15.5 |
| Transaxle fluid drain plug (for A/T vehicle) | 40 | 4.0 | 29.0 |
| Ball stud bolt | 60 | 6.0 | 43.5 |
| Tie rod end castle nut | 35 - 55 | 3.5 - 5.5 | 25.5 - 40.0 |
| Drive shaft nut | 175 | 17.5 | 127.0 |
| Wheel nut | 85 | 8.5 | 61.5 |
| Center shaft support bolt | 55 | 5.5 | 40.0 |
Reference:
For the tightening torque of fastener not specified in this section, refer to FASTENERS INFORMATION .