4. Forward Clutch Preliminary Check

Part 1 Of 2:

Part 2 Of 2:

Forward Clutch Preliminary Check





1. Measure piston stroke before disassembly.
a. Install forward clutch assembly (2) to transaxle rear cover (1).
b. Measure piston stroke while applying and releasing compressed air (400 - 800 kPa, 4 - 8 kgf/cm2, 57 - 113 psi) through oil hole (3) using special tools.
Special Tool
(A): 09900-20606
(B): 09900-20701
Forward clutch piston stroke
Standard: 0.84 - 1.06 mm (0.033 - 0.042 inch)
If measured piston stroke exceeds specified value, disassemble and inspect inner parts.