Scan Tool Data Definitions

Scan Tool Data Definition

Back Up Volt (V): This parameter indicates the capacity of the backup condenser installed to maintain the ignition current (as much as possible) even when the power supply to SDM that ignites the inflator is shut off.

Battery Voltage (V): Battery voltage is an analog input signal read by the SDM.

System ID (4 ch / 6 ch): This parameter indicates the number of initiator circuits.

Driv Air Bag Ini Res (OHMS): This parameter indicates the resistance of the driver's air bag initiator circuit.

Pass Air Bag Ini Res (OHMS): This parameter indicates the resistance of the passenger's air bag initiator circuit.

Driv Preten Ini Res (OHMS): This parameter indicates the resistance of the driver's seat belt pretensioner initiator circuit.

Pass Preten Ini Res (OHMS): This parameter indicates the resistance of the passenger's seat belt pretensioner initiator circuit.

Driv Sidebag Ini Res (OHMS): This parameter indicates the resistance of the driver's side air bag initiator circuit.

Pass Sidebag Ini Res (OHMS): This parameter indicates the resistance of the passenger's side air bag initiator circuit.