LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2006 >> Aerio Base, FWD, Standard >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heater And Ventilation >> Diagnosis Information & Procedure >> Scan Tool Data >> Scan Tool Data Definitions
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Scan Tool Data Definitions

TEMP CONT SWITCH  Position of temperature control selector of HVAC control module

MODE CONT SWITCH  Position of airflow selector of HVAC control module

FAN CONT SWITCH  Position of air speed selector of HVAC control module

FAN DESIRE VOLT  Voltage for blower motor

AIR MIX POS SENSOR  Input signal from position sensor in temperature control actuator

MODE POS SENSOR  Input signal from position sensor in air flow control actuator

BLOWER FAN LOAD (ON or OFF)  OFF: Position of blower speed selector is 1st or 2nd position / ON: Position of blower speed selector is more than 3rd position.

AIR INTAKE MODE (FRE or REC)  State of air intake mode

REC INDICATOR LAMP (ON or OFF)  State of recirculation air (REC) indicator lamp

FRE INDICATOR LAMP (ON or OFF)  State of fresh air indicator lamp

REAR DEF INDICATOR LAMP (ON or OFF) State of rear defogger indicator lamp 

scientia non olet · About LEMON Manuals