LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2006 >> Aerio Base, FWD, Standard >> Repair and Diagnosis (Single Page) >> Engine Performance >> Testing & Diagnosis >> Aux. Emission Control Devices >> Repair Instruction >> EVAP Canister Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

EVAP Canister Removal and Installation: Removal

  1. Hoist vehicle.
  2. Disconnect purge hose (1), vent valve hose (2) and refuel vapor control valve hose (3) from pipes.

    For quick joint, disconnect it as follows:

    1. Remove mud or dust around joint by blowing compressed air, and push joint fully in arrow direction (a).
    2. Disconnect hose joint while joint lock is unlocked by pushing both sides of joint (b).
  3. Disconnect vent valve wire harness connector.
  4. Remove EVAP canister with bracket (4) from vehicle.
  5. Remove EVAP canister from bracket.
    Fig 1: Disconnect Purge Hose, Vent Valve Hose And Refuel Vapor Control Valve Hose From Pipes
    G04589605Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals