LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2006 >> Aerio Base, FWD, Standard >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Repair Instruction >> Water Pump Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Water Pump Removal and Installation: Removal

  1. Disconnect negative cable at battery.
  2. Drain coolant and tighten drain plug.
  3. Remove condenser cooling fan (if equipped with A/C).
  4. Remove radiator outlet hose from thermostat cap (2).
  5. Remove heater outlet pipe bolt (1).
    Fig 1: Removing Radiator Outlet Hose From Thermostat Cap
    G04589963Courtesy of SUZUKI OF AMERICA CORP.
  6. Remove generator belt referring to GENERATOR DRIVE BELT REMOVAL AND INSTALLATION .
  7. Remove compressor from its bracket with hoses still attached (if equipped with A/C).
  8. Remove water pump assembly (1) by removing its 4 bolts (2).
    NOTE: Do not lose dowel pins when removing water pump.
    Fig 2: Removing Water Pump Assembly
    G04589964Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals