LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2006 >> Aerio Base, FWD, Standard >> Repair and Diagnosis (Single Page) >> Electrical >> Horns >> Instrumentation/Driver Info./Horn >> Repair Procedure >> Instrument Panel Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Instrument Panel Removal and Installation: Removal

  1. Disconnect negative (-) cable at battery.
  2. Disable air bag system referring to DISABLING AIR BAG SYSTEM or DISABLING AIR BAG SYSTEM .
  3. Remove steering column hole cover.
  4. Detach steering lower shaft referring to STEERING LOWER SHAFT REMOVAL AND INSTALLATION .
  5. Remove glove box (1) and hood latch release lever (2).
    Fig 1: Identifying Glove Box (1) And Hood Latch Release Lever (2) Removal Direction
    G04591593Courtesy of SUZUKI OF AMERICA CORP.
  6. Remove console box referring to CONSOLE BOX COMPONENTS.
  7. Remove instrument panel center lower covers (1).
    Fig 2: Locating Instrument Panel Center Lower Covers (1)
    G04591594Courtesy of SUZUKI OF AMERICA CORP.
  8. Remove front pillar trims (1), front pillar lower garnishes (2), front side sill scuffs (3) and dash side trims (4).
    Fig 3: Removing Front Pillar Trims (1) Lower Garnishes (2) Side Sill Scuffs (3) And Dash Side Trims (4)
    G04591595Courtesy of SUZUKI OF AMERICA CORP.
  9. Disconnect instrument panel harness connectors and antenna cable which need to be disconnected for removal for instrument panel.
  10. Remove instrument panel ground wire.
  11. Remove instrument panel mounting bolts (1).
  12. Remove instrument panel (2) with steering column, steering support member (3) and instrument panel harness.
    Fig 4: Removing Instrument Panel Mounting Bolts (1)
    G04591596Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals