LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2006 >> Aerio Base, FWD, Standard >> Repair and Diagnosis (Single Page) >> Brakes >> Traction Control >> Brakes - Abs >> Diagnostic Information and Procedures >> ABS Warning Lamp Flashes Continuously while Ignition Switch Is ON >> Troubleshooting
April 5, 2026: LEMON Manuals is launched! Read the announcement.

ABS Warning Lamp Flashes Continuously while Ignition Switch Is ON: Troubleshooting

TEST PROCEDURE - ABS WARNING LAMP FLASHES CONTINUOUSLY WHILE IGNITION SWITCH ON

Step Action YES NO
1  Is diagnosis switch terminal connected to ground via service wire?  Go to Step 3. Go to Step 2.
2 
  1. Ignition switch ON.
  2. Measure voltage between diagnosis switch terminal and ground.

Is it 10 - 14 V? 		 Substitute a known-good ABS hydraulic unit / control module assembly and recheck. "PNK" wire circuit shorted to ground.
3 
  1. Ignition switch ON.

Does flashing of ABS warning lamp indicate DTC? 		 Go to Step 7 of ABS CHECK . Substitute a known-good ABS hydraulic unit / control module assembly and recheck.
scientia non olet · About LEMON Manuals