DTC Confirmation Procedure
NOTE:
Check to make sure that the following conditions are satisfied when using this "DTC confirmation procedure".
- Intake air temp.: Between -10°C and 45°C (14°F and 113°F)
- Altitude (barometric pressure): 2500 m, 8202 ft or less (560 mmHg, 75 kPa or more)
- With ignition switch turned OFF, connect scan tool.
- Turn ON ignition switch and clear DTC using scan tool.
- Start engine and warm up to normal operating temperature.
- Run engine at idle speed for 60 sec. or more.
- Check DTC and pending DTC.