DTC Confirmation Procedure
NOTE:
Make sure that the following conditions are satisfied 5 hours after ignition switch turned OFF.
- Intake air temp.: Between 0°C (32°F) to 50°C (122°F)
- Engine coolant temp.: Between 4°C (39°F) to 45°C (113°F)
- Altitude (barometric pressure): 2400 m, 8000 ft or less (560 mmHg, 75 kPa or more)
- Connect scan tool to DLC with ignition switch turned OFF.
- Turn ON ignition switch and clear DTC.
- Run engine at idle for 10 minutes.
- Confirm that DTC is no detected.
- Turn ignition switch OFF and leave for 6 hours.
- Check DTC.