LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2006 >> Aerio Base, AWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Diagnostic Information and Procedures >> DTC Clearance >> To Clear DTC Stored in TCM with Scan Tool - Method-2
April 5, 2026: LEMON Manuals is launched! Read the announcement.

To Clear DTC Stored in TCM with Scan Tool - Method-2

  1. Turn ignition switch OFF.
  2. Connect SUZUKI scan tool to data link connector (DLC) (1) located In underside of instrument panel at driver's seat side.

    Special Tool 

    1. SUZUKI scan tool 
      Fig 1: Connecting SUZUKI Scan Tool To Data Link Connector
      G04591813Courtesy of SUZUKI OF AMERICA CORP.
  3. Turn ignition switch ON.
  4. Clear DTC according to instructions displayed on SUZUKI scan tool. Refer to SUZUKI scan tool operators manual for further details.
  5. After completing the clearance, turn ignition switch OFF and disconnect SUZUKI scan tool from data link connector (DLC) (1).
scientia non olet · About LEMON Manuals