Abnormal Rear Tire Wear (TS 05 11225)
Publication date: 2005-11-22Reference number: TS 05 11225
ABNORMAL REAR TIRE WEAR
TECHNICAL SERVICE BULLETIN
| SUZUKI: | 2004~2006 AERIO (RH423) |
| SECTION: | Suspension-Wheels and Tires |
AFFECTED VIN(S)
~JS2RA61S_65300270
~JS2RA62S_65300677
~JS2RB61S_65300052
~JS2RB62S_65300068
~JS2RC61H_65350458
~JS2RC62H_65350313
~JS2RD61H_65350133
~JS2RD62H_65350126
CONDITION
Uneven rear tire tread wear (inside tread worn more then the outside tread).
CAUSE
Incorrect rear toe alignment specification on 2WD and AWD models. Also, the viscous coupling could contribute to this rear tire wear on vehicles with the affected VINs.
CORRECTION
Determine that the tires have been maintained properly using the following criteria:
- Inspect the rear tires for unusual wear compared to the front tires.
- Confirm the scheduled tire rotations have been completed.
- Confirm tire pressures are within specification.
If it is determined that the tires have been maintained properly, check and if necessary adjust the rear toe alignment on 2WD models according to the following specifications.
For affected AWD models (see Parts Information), replace the viscous coupling with the specified part number and adjust the rear toe according to the new specifications. Use the appropriate service manual and diagram below to remove and install the propeller shaft and viscous coupling.
PART(S) INFORMATION
| Part Numbers | Description | QTY | Notes |
|---|---|---|---|
| 27610-54G00 | Coupling, Viscous | 1 | AWD Models Only ~JS2RB61S_65300310 ~JS2RB62S_65300302 ~JS2RD61H_65350595 ~JS2RD62S_65350636 |
WARRANTY CLAIM INFORMATION
| Model | Labor Operation | Description | Failed Part Number | Complaint Code | Defect Code | Labor Time |
|---|---|---|---|---|---|---|
| 2WD | HK9999 | Rear Control Rod Assy. | 46300-60G21 | 83 | 48 | 0.9 Hrs. |
| AWD | GF9999 | Viscous Coupling | 27610-54G00 | 23 | 35 | 1.9 Hrs. |
2WD and AWD Alignment Specifications
| Current Specification | New Specification | |
|---|---|---|
| Toe | IN 6.2 ± 2mm (0.244 ± 0.079in.) | IN 2.6 ± 2mm (0.1 ± 0.079in.) |
| Side Slip Limit | IN 7.0mm/m to IN 10.0mm/m (IN 0.276in./3.3ft. to IN 0.393in/3.3ft.) | IN 1.0mm/m to IN 4.0mm/m (IN 0.0394in./3.3ft to IN 0.157in./3.3ft) |