Heater Unit Removal and Installation: Removal
- Disconnect negative (-) cable at battery.
- Drain engine coolant, and then disconnect heater hoses (1) from heater unit.
- Remove heater unit mounting nuts (2).
Courtesy of SUZUKI OF AMERICA CORP.
- Remove instrument panel referring to INSTRUMENT PANEL REMOVAL AND INSTALLATION
.
- Remove blower unit (1) referring to Step 5) to 7) of BLOWER UNIT REMOVAL AND INSTALLATION .
- Disconnect connectors from the following parts.
- Temperature control actuator
- Air flow control actuator
- Blower motor controller
- Remove drain hose (2) from vehicle body.
- Remove heater unit (3) from vehicle body.
Courtesy of SUZUKI OF AMERICA CORP.