Clutch Master Cylinder Disassembly and Reassembly: Disassembly

WARNING: This page is about a different variant/trim than selected.

CAUTION: Never disassemble push rod assembly, disassembling will affect original performance of clutch system.

Remove boot (1) and then circlip (2) with piston rod assembly (3) pushed in.

Fig 1: Removing Circlip
Courtesy of SUZUKI OF AMERICA CORP.
Blow compressed air gradually into hole for pipe connection to remove piston assembly (1), using care to prevent it from jumping out.

Fig 2: Removing Piston Assembly Using Compressed Air
Courtesy of SUZUKI OF AMERICA CORP.