Crankshaft Position (CKP) Sensor Removal and Installation: Installation

Reverse removal procedure noting the following.

• Check to make sure that crankshaft position sensor (1) is free from any metal particles and damage.
• Apply engine oil to O-ring of sensor.
• Install crankshaft position sensor to cylinder block (2) with specified torque.

  Tightening torque 

  Crankshaft position sensor bolt a: 6 N.m (0.6 kg-m, 4.5 lb-ft) 

  Fig 1: Tightening Crankshaft Position Sensor Bolt

  Courtesy of SUZUKI OF AMERICA CORP.
• Connect connector and fix wire harness with clamp securely.