Oil Pump Disassembly and Assembly: Assembly

Reference: OIL PUMP INSPECTION 

1. Wash, clean and then dry all disassembled parts.
2. Apply thin coat of engine oil to inner and outer rotors, and inside surfaces of oil pump case.
3. Install outer rotor to pump case No.1.
4. Install relief valve (3), relief spring (2) and retainer (1) to oil pump case No.2 (4).

   Tighten retainer to specified torque.

   Tightening torque 

   Oil pump relief valve retainer a: 28 N.m (2.8 kg-m, 20.5 lb-ft) 

5. Install oil pump case pins (5) to oil pump case No.2.
   Fig 1: Installing Relief Valve, Relief Spring And Retainer To Oil Pump Case

   Courtesy of SUZUKI OF AMERICA CORP.
6. Assemble oil pump. After assembling oil pump, check to be sure that rotor turns smoothly by hand.

   Tightening torque 

   Oil pump case bolt a: 12 N.m (1.2 kg-m, 9.0 lb-ft) 

   Fig 2: Tightening Oil Pump Case Bolt

   Courtesy of SUZUKI OF AMERICA CORP.