Tightening Torque Specifications
TIGHTENING TORQUE SPECIFICATIONS
| Fastening part | Tightening torque | Note | ||
|---|---|---|---|---|
| N.m | kg-m | lb-ft | ||
| Oil drain plug and level/filler plug (on transmission case) | 37 | 3.7 | 27.0 | |
| Transmission control lever locating bolt | 17 | 1.7 | 12.5 | / |
| Control lever boot cover bolt | 15 | 1.5 | 11.0 | |
| Back up light switch | 45 | 4.5 | 32.5 | |
| Gear shift lever case plate screw | 6 | 0.6 | 4.5 | |
| Engine rear mounting bolts | 55 | 5.5 | 40.0 | / |
| Engine rear mounting member bolts | 55 | 5.5 | 40.0 | |
| Transmission to engine bolt and nut | 85 | 8.5 | 61.5 | |
| Engine rear mounting bolt and nut | 55 | 5.5 | 40.0 | |
| Exhaust No. 1 pipe to exhaust No. 2 pipe bolts | 50 | 5.0 | 36.5 | |
| Exhaust No. 2 pipe to muffler bolts | 50 | 5.0 | 36.5 | |
| Main and countershaft bearing plate bolt | 18 | 1.8 | 13.0 | |
| Reverse gear shift arm bracket bolt | 18 | 1.8 | 13.0 | |
| Low and high speed gear shift fork bolt | 20 | 2.0 | 14.5 | |
| Locating screw | 19 | 1.9 | 14.0 | |
| Input shaft bearing retainer bolt | 17 | 1.7 | 12.5 | |
| Rear case to intermediate case bolt | 37 | 3.7 | 27.0 | |
| Return spring reverse bolt (black color) | 37 | 3.7 | 27.0 | |
| Return spring low bolt | 37 | 3.7 | 27.0 | |
| Back-up light switch | 45 | 4.5 | 32.5 | |
| Clutch housing bolt | 36 | 3.6 | 26.0 | |
| Interlock cam plug | 19 | 1.9 | 14.0 | |
NOTE:
The specified tightening torque is also described in the following. "MANUAL TRANSMISSION CASE COMPONENTS " "GEAR SHIFTER COMPONENTS "
Reference:
For the tightening torque of fastener not specified in this article, refer to "FASTENER INFORMATION ".