LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2005 >> XL-7 LX, RWD, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transmission) >> 5A/T >> Diagnostic Information and Procedures >> DTC Check >> Reading DTC Using "O/D OFF" Lamp
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Reading DTC Using "O/D OFF" Lamp

WARNING: This page is about a different variant/trim than selected.
  1. Turn ignition switch OFF.
  2. Remove steering column hole cover (1).
  3. Using service wire, connect diagnosis switch terminal (3) of monitor connector (2) to ground terminal (4).
    Fig 1: Identifying Diagnosis Switch Terminal Of Monitor Connector
    G04099791Courtesy of SUZUKI OF AMERICA CORP.
  4. Turn ignition switch ON.
  5. Read flashing pattern of "O/D OFF" lamp which represents DTC as shown in example below and write it down.
    Fig 2: Identifying Flashing Pattern Of "O/D OFF" Lamp
    G04099792Courtesy of SUZUKI OF AMERICA CORP.
  6. After completing the check, turn ignition switch OFF and disconnect service wire from monitor connector.