Tightening torque Specifications
TIGHTENING TORQUE SPECIFICATIONS
| Fastening part | Tightening torque | Note | ||
|---|---|---|---|---|
| N.m | kg-m | lb-ft | ||
| Differential oil level/filler plug | 50 | 5.0 | 36.5 | |
| Differential oil drain plug | 28 | 2.8 | 20.5 | |
| Differential carrier bolt | 55 | 5.5 | 40.0 | |
| Propeller shaft flange nut | 50 | 5.0 | 36.5 | (For H25 engine model) |
| Propeller shaft flange nut | 60 | 6.0 | 43.5 | (For H27 engine model) |
| Differential case bolt | 41 | 4.1 | 30.0 | |
| Bevel gear bolt | 85 | 8.5 | 61.5 | (H25 engine model) |
| Differential case screw | 9 | 0.9 | 6.5 | |
| Bevel gear bolt | Tighten 40 N.m (4.0 kg-m, 29.5 lb-ft) + 50° | (H27 engine model) | ||
| Bearing cap bolt (Provisional torque) | 15 | 1.5 | 11.0 | |
| Lock plate bolt | 12 | 1.2 | 9.0 | |
| Bearing cap bolt | 85 | 8.5 | 61.5 | |
NOTE:
The specified tightening torque is also described in the following. "REAR DIFFERENTIAL COMPONENTS "
Reference:
For the tightening torque of fastener not specified in this article, refer to "FASTENER INFORMATION ".