Oil Pump Disassembly and Assembly: Assembly

WARNING: This page is about a different variant/trim than selected.

Assemble each component by reversing removal procedure and noting the following points.

Before installing inner gear and outer gear to pump body, apply A/T fluid to them.
When installing pump cover, use care so that its splined part will not cause damage to oil seal and use specified torque to tighten it to pump body.
Tightening torque

Oil pump bolt (a): 7.5 N.m (0.75 kg-m, 5.5 lb-ft)

Fig 1: Measuring Tightening Torque Of Pump Cover
Courtesy of SUZUKI OF AMERICA CORP.
When installing O-ring and oil seal, apply enough A/T fluid to them and fit them securely in groove.
After installation, check that inner gear turns smoothly by making use of torque converter.
When installing seal ring, it should not be opened more than necessary.
Fit claws of seal ring securely