LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2005 >> XL-7 EX, RWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> 5A/T >> Diagnostic Information and Procedures >> DTC Table
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Table

DIAGNOSTIC TROUBLE CODES (DTC) LIST (5AT)

DTC Description
DTC P0705 (No. 34)  Transmission Range Sensor Circuit Malfunction
DTC P0707 (No. 34)  Transmission Range Sensor Circuit Low
DTC P0711 (No. 81)  Transmission Fluid Temperature Sensor Range/Performance
DTC P0712 (No. 38)  Transmission Fluid Temperature Sensor "A" Circuit Low
DTC P0713 (No. 36)  Transmission Fluid Temperature Sensor "A" Circuit High
DTC P0717 (No. 14)  Input/Turbine Speed Sensor Circuit No Signal
DTC P0722 (No. 31)  Output Speed Sensor Circuit No Signal
DTC P0741/P0742 (No. 78/No. 77)  TCC Circuit Performance or Stuck OFF/TCC Circuit Stuck ON
DTC P0751/P0752 (No. 62/No. 61)  Shift Solenoid-A Performance or Stuck OFF/Shift Solenoid-A Stuck ON
DTC P0756/P0757 (No. 65/No. 63)  Shift Solenoid-B Performance or Stuck OFF/Shift Solenoid-B Stuck ON
DTC P0771/P0772 (No. 67/No. 66)  Shift Solenoid-E Performance or Stuck OFF/Shift Solenoid-E Stuck ON
DTC P0781 (No. 68)  1-2 Shift
DTC P0797 (No. 79)  Pressure Control Solenoid "C" Stuck ON
DTC P0962/P0966/P0970 (No. 41/No. 43/No. 45)  Pressure Control Solenoid "A-C" Control Circuit Low
DTC P0963/P0967/P0971 (No. 42 / No. 44 / No. 46)  Pressure Control Solenoid "A-C" Control Circuit High
DTC P0973/P0976/P0985 (No. 22 / No. 24 / No. 49)  Shift Solenoid "A" Control Circuit Low/Shift Solenoid "B" Control Circuit Low/Shift Solenoid "E" Control Circuit Low
DTC P0974/P0977/P0986 (No. 21 / No. 23 / No. 48)  Shift Solenoid "A" Control Circuit High/Shift Solenoid "B" Control Circuit High/Shift Solenoid "E" Control Circuit High
DTC P1701 (No. 76)  CAN Communication Problem - TCM
DTC P1702 (No. 83)  Internal Control Module Memory Check Sum Error
DTC P1703 (No. 86)  CAN Invalid Data - TCM
DTC P1740 (No. 75)  Cruise Control Signal Malfunction
DTC P1874 (No. 15)  4WD Low Switch Circuit Malfunction (Short)
DTC P1875 (No. 15)  4WD Low Switch Circuit Malfunction (Open)
DTC P2742 (No. 59)  Transmission Fluid Temperature Sensor "B" Circuit Low
DTC P2743 (No. 58)  Transmission Fluid Temperature Sensor "B" Circuit High
DTC P2763 (No. 26)  Torque Converter Clutch (TCC) Circuit High
DTC P2764 (No. 25)  Torque Converter Clutch (TCC) Circuit Low
NOTE: Type 1 DTC: DTC code which can be checked by using scan tool.
Type 2 DTC: DTC code which can be checked by using "O/D OFF" lamp.
DTC CHART

DTC No Detecting Item Detecting Condition (DTC will set when detecting) Driving Cycle When MIL Lighted
Type 1 Type 2
- 12 No malfunction is detected - -
P0705 34 Transmission Range Sensor Circuit Malfunction (PRNDL Input) Multiple signals are inputted simultaneously. 1 driving cycle
P0707 Transmission Range Sensor Circuit Low No sensor signal is inputted. 2 driving cycles
P0711 81 Transmission Fluid Temperature Sensor Range / Performance Transmission Fluid Temperature Sensor variation is less than specified value even though engine was running for specified time after engine start. 2 driving cycles
P0712 38 Transmission Fluid Temperature Sensor "A" Circuit Low Sensor output voltage is too low. 1 driving cycle
P0713 36 Transmission Fluid Temperature Sensor "A" Circuit High Sensor output voltage is too high. 1 driving cycle
P0717 14 Input / Turbine Speed Sensor Circuit No Signal No sensor signal is detected although output speed sensor signal is inputted. 1 driving cycle
P0722 31 Output Speed Sensor Circuit No Signal No sensor signal is inputted although input speed sensor signal is inputted. 1 driving cycle
P0741 78 Torque Converter Clutch Circuit Performance or Stuck Off Difference in revolution between engine and input shaft is too large although TCM is commanding TCC solenoid to turn ON. 2 driving cycles
P0742 77 Torque Converter Clutch Circuit Stuck On Difference in revolution between engine and input shaft is too small although TCM is commanding TCC solenoid to turn OFF. 2 driving cycles
P0751 62 Shift Solenoid "A" Performance or Stuck Off The gear commanded by TCM does not match the actual gear when driving. 2 driving cycles
P0752 61 Shift Solenoid "A" Stuck On The gear commanded by TCM does not match the actual gear when driving. 2 driving cycles
P0756 65 Shift Solenoid "B" Performance or Stuck Off The gear commanded by TCM does not match the actual gear when driving. 2 driving cycles
P0757 63 Shift Solenoid "B" Stuck On The gear commanded by TCM does not match the actual gear when driving. 2 driving cycles
P0771 67 Shift Solenoid "E" Performance or Stuck Off The gear commanded by TCM does not match the actual gear when driving. 2 driving cycles
P0772 66 Shift Solenoid "E" Stuck On The gear commanded by TCM does not match the actual gear when driving. 2 driving cycles
P0781 68 1-2 Shift The gear commanded by TCM does not match the actual gear when driving. 2 driving cycles
P0797 79 Pressure Control Solenoid "C" Stuck On The gear commanded by TCM does not match the actual gear when driving. 2 driving cycles
P0962 41 Pressure Control Solenoid "A" Control Circuit Low No electric flow is detected on pressure control solenoid circuit. 1 driving cycle
P0963 42 Pressure Control Solenoid "A" Control Circuit High Too much electric flow is detected on pressure control solenoid circuit. 1 driving cycle
P0966 43 Pressure Control Solenoid "B" Control Circuit Low No electric flow is detected on pressure control solenoid circuit. 1 driving cycle
P0967 44 Pressure Control Solenoid "B" Control Circuit High Too much electric flow is detected on pressure control solenoid circuit. 1 driving cycle
P0970 45 Pressure Control Solenoid "C" Control Circuit Low No electric flow is detected on pressure control solenoid circuit. 1 driving cycle
P0971 46 Pressure Control Solenoid "C" Control Circuit High Too much electric flow is detected on pressure control solenoid circuit. 1 driving cycle
P0973 22 Shift Solenoid "A" Control Circuit Low Voltage of shift solenoid terminal is low although TCM is commanding shift solenoid to turn ON. 1 driving cycle
P0974 21 Shift Solenoid "A" Control Circuit High Voltage of shift solenoid terminal is high although TCM is commanding shift solenoid to turn OFF. 1 driving cycle
P0976 24 Shift Solenoid "B" Control Circuit Low Voltage of shift solenoid terminal is low although TCM is commanding shift solenoid to turn ON. 1 driving cycle
P0977 23 Shift Solenoid "B" Control Circuit High Voltage of shift solenoid terminal is high although TCM is commanding shift solenoid to turn OFF. 1 driving cycle
P0985 49 Shift Solenoid "E" Control Circuit Low Voltage of shift solenoid terminal is low although TCM is commanding shift solenoid to turn ON. 1 driving cycle
P0986 48 Shift Solenoid "E" Control Circuit High Voltage of shift solenoid terminal is high although TCM is commanding shift solenoid to turn OFF. 1 driving cycle
P1701 76 CAN communication problem -TCM Transmitting or receiving error detected to TCM for specified time continuously. 1 driving cycle
P1702 83 Internal Control Module Memory Check Sum Error Calculation of current data stored in TCM is not correct comparing with pre-stored checking data in TCM. 1 driving cycle
P1703 86 CAN Invalid Data - TCM TCM receives malfunction signal of throttle position, engine coolant temperature, engine revolution and engine torque from ECM. (1)
P1740 75 Cruise Control Signal Malfunction O/D off signal from cruise control module is inputted although vehicle speed is too slow for executing cruise control. 1 driving cycle
P1874 15 4WD Low switch circuit malfunction (Short) Actual transfer position is 2H or 4H although transfer low signal is inputted. 1 driving cycle
P1875   4WD Low switch circuit malfunction (Open) Actual transfer position is 4L although transfer low signal is not inputted. 1 driving cycle
P2742 59 Transmission Fluid Temperature Sensor "B" Circuit Low Sensor output voltage is too low. 1 driving cycle
P2743 58 Transmission Fluid Temperature Sensor "B" Circuit High Sensor output voltage is too high. 1 driving cycle
P2763 26 Torque Converter Clutch Circuit High Too much electric flow is detected on TCC solenoid circuit. 1 driving cycle
P2764 25 Torque Converter Clutch Circuit Low No electric flow is detected on TCC solenoid circuit. 1 driving cycle
(1) TCM does not desire turning on malfunction indicator lamp to ECM but DTC is stored in TCM memory.