Manual Selector Assembly Removal and Installation: Installation

Reverse removal procedure to install manual selector assembly noting the following instructions.

• Make sure that selector cable clip (3) holds selector cable (1) on manual selector assembly (2) securely.
  Fig 1: Installing Manual Selector Assembly

  Courtesy of SUZUKI OF AMERICA CORP.
• Connect interlock cable end to cam referring to "Installation" in "KEY INTERLOCK CABLE REMOVAL AND INSTALLATION ".
• Tighten manual selector assembly mounting bolts as specified torque.

  Tightening torque 

  Manual selector assembly mounting bolts: 18 N.m (1.8 kg-m, 13.5 lb-ft) 

• Upon completion of installation, confirm that brake (key) interlock system operates properly.