Not Using SUZUKI Scan Tool

Turn ignition switch to ON position and wait about 6 seconds or more.
Using service wire (4), repeat shorting and opening between diagnosis switch terminal (3) on "AIR BAG" monitor coupler (1) and body ground (2) 5 times at about 1 second intervals.

Fig 1: Identifying Blinking Pattern Of Air Bag Monitor Coupler
Courtesy of SUZUKI OF AMERICA CORP.
Perform "DTC CHECK " and confirm that normal DTC (DTC 12) is displayed and not malfunction DTC.

NOTE: If DTC B1051 or DTC B1071 is stored in SDM, it is not possible to clear DTC.