Tightening Torque Specifications
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATIONS
| Fastening part | Tightening torque | Note | ||
|---|---|---|---|---|
| N.m | kg-m | lb-ft | ||
| Oil drain plug and level/filler plug | 38 | 3.8 | 27.5 | |
| Transmission control lever locating bolt | 17 | 1.7 | 12.5 | / |
| Control lever boot cover bolt | 15 | 1.5 | 11.0 | |
| Back up light switch | 45 | 4.5 | 32.5 | |
| Gear shift lever case plate screw | 6 | 0.6 | 4.5 | |
| Engine rear mounting bolt and nut | 50 | 5.0 | 36.5 | / |
| Transmission to engine bolt and nut | 85 | 8.5 | 61.5 | |
| Exhaust center pipe to manifold nut | 50 | 5.0 | 36.5 | |
| Muffler to exhaust center pipe bolt | 50 | 5.0 | 36.5 | |
| Universal joint flange bolt | 50 | 5.0 | 36.5 | |
| Bearing plate bolt | 19 | 1.9 | 14.0 | |
| Reverse gear shaft bolt | 18 | 1.8 | 13.0 | |
| Reverse link stay bolt | 19 | 1.9 | 14.0 | |
| Shift fork bolt | 20 | 2.0 | 14.5 | / |
| 5th gear shift fork bolt | 20 | 2.0 | 14.5 | |
| Locating spring screw | 19 | 1.9 | 14.0 | |
| Input shaft bearing retainer bolt | 17 | 1.7 | 12.5 | |
| Rear case to intermediate case bolt | 35 | 3.5 | 25.5 | |
| Gear shift shaft inner bolt | 39 | 3.9 | 28.5 | |
| Gear shift shaft inner plug | 19 | 1.9 | 14.0 | |
| Return spring reverse bolt (black color) | 28 | 2.8 | 20.5 | |
| Locating screw | 19 | 1.9 | 14.0 | |
| Back-up light switch | 45 | 4.5 | 32.5 | |
| Clutch housing bolt | 50 | 5.0 | 36.5 | |
| Interlock cam plug | 19 | 1.9 | 14.0 | |
NOTE:
The specified tightening torque is also described in the following.
"MANUAL TRANSMISSION CASE COMPONENTS "
"GEAR SHIFTER COMPONENTS "
"INPUT AND COUNTERSHAFT COMPONENTS "
"MANUAL TRANSMISSION CASE COMPONENTS "
"GEAR SHIFTER COMPONENTS "
"INPUT AND COUNTERSHAFT COMPONENTS "
Reference:
For the tightening torque of fastener not specified in this article, refer to "FASTENER INFORMATION ".