DTC Troubleshooting
DTC TROUBLESHOOTING CHART
| Step | Action | Yes | No |
|---|---|---|---|
| 1 | Was "Engine and Emission Control System Check" performed? | Go to Step 2. | Go to "ENGINE AND EMISSION CONTROL SYSTEM CHECK ". |
| 2 | Check ECT sensor and its circuit
Is 164 °C (327 °F) indicated? |
Go to Step 3. | Intermittent trouble. Check for intermittent referring to "INTERMITTENT AND POOR CONNECTION INSPECTION ". |
| 3 | Check wire harness
Is -40 °C (-40 °F) indicated? |
Replace ECT sensor. | "GRN" circuit shorted to ground. If wire is OK, substitute a known-good ECM and recheck. |